SMPTE — Motion-Picture Film (35-mm)
SMPTE collection · 18 docs · has active base · stabilized
| Document | Status | Publication Date |
|---|---|---|
Camera Aperture Images and Usage (1.1) This standard specifies the dimensions of the camera aperture images and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 35-mm…(1.1) This standard specifies the dimensions of the camera aperture images and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 35-mm motion-picture cameras. (1.2) Motion-picture cameras used for different purposes require different aperture sizes. This standard specifies the image dimensions resulting from four styles of apertures used for the following purposes: Motion-picture cameras used for different purposes require different aperture sizes. This standard specifies the image dimensions resulting from four styles of apertures used for the following purposes: Style A: Four perforations per frame nonanamorphic sound motion pictures — Style B: Four perforations per frame anamorphic sound motion pictures — Style C: Four perforations per frame instrumentation photography and full-frame motion pictures — Style D: Three perforations per frame motion pictures (1.3) This standard also specifies the position of the photographic emulsion and the frame rate for 35-mm motion-picture cameras. | Active · Stabilized | 1998-10-01 |
Perforated BH This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a BH-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or 4.750 mm). | Active · Stabilized | 2005-07-13 |
Perforated CS-1870 This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a CS-type perforation and a perforation pitch of 0.1870 in (4.750 mm). | Active · Stabilized | 2002-07-26 |
Prints Made on Continuous Contact Printers - Exposed Areas for Picture and Audio (1.1) This standard specifies the location and width dimensions of the exposed areas for picture and photographic audio on 35-mm motion-picture prints made on continuous contact printers. (1.2) This standard is applicable to the printing of motion-picture raw stock which is cut…(1.1) This standard specifies the location and width dimensions of the exposed areas for picture and photographic audio on 35-mm motion-picture prints made on continuous contact printers. (1.2) This standard is applicable to the printing of motion-picture raw stock which is cut and perforated in accordance with ANSI/SMPTE 139 or SMPTE 237. (1.3) This standard refers to the adjustment of the printer, and is in accordance with ANSI/SMPTE 40. | Active · Stabilized | 2001-06-06 |
Release Prints - Four Magnetic Audio Records (1.1) This standard specifies the position, dimensions, reproducing speed, identity, and use of the four magnetic audio records on 35-mm motion-picture release prints. (1.2) The standard also specifies the longitudinal picture-audio displacement on the film. | Active · Stabilized | 2000-05-30 |
Perforated KS This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a KS-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or 4.750 mm). | Active · Stabilized | 2003-11-12 |
Perforated 8-mm Type S, 5R (1-3-5-7-0) | Active · Stabilized | 1994-01-31 |
Perforated 8-mm Type S, 2R-1664 (1-0) This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with one row of 8-mm type S perforations and one row of special perforations having a perforation pitch of 0.1664 in (4.227 mm). The film stock described in this standard is intended for…This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with one row of 8-mm type S perforations and one row of special perforations having a perforation pitch of 0.1664 in (4.227 mm). The film stock described in this standard is intended for use as an intermediate film in the production of prints. | Active · Stabilized | 2002-07-26 |
Perforated 16-mm, 3R (1-3-0) This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with 16-mm perforations in positions 1-3-0 and a perforation pitch of either 0.2994 in or 0.3000 in (7.605 mm or 7.620 mm). The width of the 16-mm strip after processing and slitting is…This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with 16-mm perforations in positions 1-3-0 and a perforation pitch of either 0.2994 in or 0.3000 in (7.605 mm or 7.620 mm). The width of the 16-mm strip after processing and slitting is also specified. | Active · Stabilized | 2001-06-06 |
Four-Track Magnetic Audio Release Prints - Magnetic Striping This standard specifies the location and dimensions of the magnetic recording stripes on 35-mm motion-picture film used for four-track magnetic audio release prints having an anamorphic-type picture image. | Active · Stabilized | 1995-09-12 |
Projector Usage - Release Prints Having Four Perforations per Frame (1.1) This standard specifies the position of the emulsion for 35-mm motion-picture release prints having four perforations per frame and the position of the magnetic striping relative to the projector lens. (1.2) The standard also specifies the rate of projection for systems…(1.1) This standard specifies the position of the emulsion for 35-mm motion-picture release prints having four perforations per frame and the position of the magnetic striping relative to the projector lens. (1.2) The standard also specifies the rate of projection for systems defined in 1.1 and the relevant standards on location of the picture and audio records. | Active · Stabilized | 2002-07-26 |
Motion-Picture Prints - Projectable Image Area (1.1) This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film and the placement of this area relative to the perforations and the reference edge of the film. (1.2) This standard specifies three types of image…(1.1) This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film and the placement of this area relative to the perforations and the reference edge of the film. (1.2) This standard specifies three types of image areas intended for theatrical projection (see A.4): – Style A: General theatrical release prints commonly referred to as nonanamorphic or wide screen; – Style B: Theatrical release prints with an anamorphic image; – Style C: Classic theatrical prints. | Active · Stabilized | 2000-05-30 |
Prints — Two-Track Photographic Analog Audio Records (1.1) This standard specifies the lateral location and dimensions of two-track variable-area analog audio records on 35-mm motion-picture prints. (1.2) This standard also specifies the area scanned in the audio reproducer. | Active · Stabilized | 2011-03-22 |
Analog Photographic Audio Reproduction Characteristics This standard specifies the electrical frequency response characteristics for analog photographic audio reproduction in motion-picture control rooms and indoor theatres. It is intended to assist in standardization of recording monitor and reproduction characteristics of 35-mm…This standard specifies the electrical frequency response characteristics for analog photographic audio reproduction in motion-picture control rooms and indoor theatres. It is intended to assist in standardization of recording monitor and reproduction characteristics of 35-mm motion-picture audio in studio dubbing theatres, review rooms, and indoor theatres. The standard covers that part of the motion-picture audio-system from the transducer to the input terminals of the main fader. | Active · Stabilized | 2007-12-14 |
Four-Track Striped Release Prints - Recorded Characteristic of Magnetic Audio Records This standard specifies the recorded characteristic of magnetic audio records on 35-mm four-track striped motion-picture release prints, when reproduced at 24 frames per second or approximately 90 ft (27 m) per minute. | Active · Stabilized | 1998-09-24 |
Perforated DH-1870 This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a DH-type perforation and a perforation pitch of 0.1870 in (4.750 mm). | Active · Stabilized | 2003-11-12 |
Manufacturer-Printed, Latent Image Identification Information (1.1) This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also specifies the encoding format to be used for these…(1.1) This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also specifies the encoding format to be used for these machine-readable numbers, as well as the area scanned and the spectral characteristics of the scanner. (1.2) This standard also specifies the position, dimensions, and content of human-readable identification (key) numbers for use on 35-mm motion-picture films intended for original photography or intermediate printing which also include the machine-readable key numbers described in 1.1. These numbers normally will be exposed onto the film at the time of manufacture. (1.3) This standard further specifies an area that may be used for optional manufacturer-specific film-type identification information. (1.4) This standard also specifies an area on the film which is not to be exposed by the film manufacturer, thus leaving it available for customer data recording. (1.5) Finally, this standard specifies an optional frameline index mark. | Active · Stabilized | 2008-10-10 |
Stereoscopic Prints with Vertically Positioned Subframes - Projectable Image Areas This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film using vertically positioned subframes for stereoscopic projection, and the placement of this area relative to the perforations and the reference edge of…This standard specifies the maximum dimensions of the film image area intended for projection from a 35-mm motion-picture film using vertically positioned subframes for stereoscopic projection, and the placement of this area relative to the perforations and the reference edge of the film. | Active · Stabilized | 1998-06-22 |