SMPTE — Motion-Picture Film (16-mm)
SMPTE collection · 14 docs · has active base · stabilized
| Document | Status | Publication Date |
|---|---|---|
Camera Aperture Image and Usage (1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 16-mm motion-picture film. The location of the perforations is based on dimensions given in SMPTE 109. (1.2) This standard also…(1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 16-mm motion-picture film. The location of the perforations is based on dimensions given in SMPTE 109. (1.2) This standard also specifies the position of the emulsion and the frame rate for 16-mm motion-picture film perforated one or two edges. | Active · Stabilized | 2004-11-08 |
Picture and Sound Contact Printing - Printed Areas This standard specifies the location and size of the printed picture and photographic sound track areas for both negative/positive and reversal contact printing operations. An opaque line should appear between picture and sound in the finished print. The dimensions given for…This standard specifies the location and size of the printed picture and photographic sound track areas for both negative/positive and reversal contact printing operations. An opaque line should appear between picture and sound in the finished print. The dimensions given for picture-printed area and for the two widths of sound-printed area provide for an overlap of picture- and soundprinted areas, or for a gap between them. The specific aperture to be used for printing sound will be chosen to provide the desired black line, as dictated by the printing materials and processing conditions in use. | Active · Stabilized | 1995-05-10 |
100-Mil Magnetic Striping This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture film, which is used for both picture and sound. | Active · Stabilized | 1996-03-08 |
200-Mil Edge Position - Magnetic Audio Record This standard specifies the position, dimensions, and reproducing speed of the nominal 0.200-in (5.08-mm) magnetic audio record on 16-mm motion-picture film. | Active · Stabilized | 2004-11-08 |
Perforated 2R-3000 - Magnetic Striping This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture film with perforations along both edges to be used for both picture and audio. | Active · Stabilized | 2003-12-14 |
Perforated 1R and 2R This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with perforations along one or both edges and a perforation pitch of either 0.2994 in or 0.3000 in (7.605 mm or 7.620 mm) for the following two categories: (a) 16-mm motion-picture…This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with perforations along one or both edges and a perforation pitch of either 0.2994 in or 0.3000 in (7.605 mm or 7.620 mm) for the following two categories: (a) 16-mm motion-picture films; (b) manufacturer-designated 16-mm professional motion-picture camera films with tighter tolerances. | Active · Stabilized | 2003-11-12 |
100-Mil Magnetic Audio Record (1.1) This standard specifies the position, dimensions, and reproducing speed of the nominal 100-mil (2.54-mm) magnetic audio record on 16-mm motion-picture film. (1.2) This standard also specifies the longitudinal picture-audio displacement on the film. | Active · Stabilized | 2004-11-08 |
Magnetic-Photographic Audio Records - Magnetic Striping of Prints This standard specifies the location and dimensions of the magnetic striping material applied to 16-mm motion-picture prints, containing a picture and photographic audio record, for the purpose of employing both a magnetic and the existing photographic audio record. | Active · Stabilized | 2003-12-14 |
Perforated 8-mm Type S, (1-4) This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with 8-mm type S perforations in positions 1 and 4 and a perforation pitch of either 0.1664 in or 0.1667 in. The width of the 8-mm strip after processing and slitting is also specified. | Active · Stabilized | 2001-06-06 |
Type W Camera Aperture Image (1.1) This standard specifies the dimensions of the image area produced by type W camera aperture on 16-mm motion-picture film intended for enlargement to nonanamorphic 35-mm motion-picture film with an aspect ratio of 1.66:1 or greater. It also specifies the position of the…(1.1) This standard specifies the dimensions of the image area produced by type W camera aperture on 16-mm motion-picture film intended for enlargement to nonanamorphic 35-mm motion-picture film with an aspect ratio of 1.66:1 or greater. It also specifies the position of the image relative to the reference edge of the film and to the perforations. (1.2) This standard further specifies the dimensions and location of the enlarged image area on 35-mm internegatives or duplicate negatives and the enlargement ratio in optical printing from 16-mm type W originals. | Active · Stabilized | 1996-04-08 |
Magnetic Audio Records - Two Records on 16-mm Magnetic Film (1.1) This standard specifies the lateral positions and width dimensions of two 3.81 mm (0.150 in) magnetic audio records and a control track on 16-mm single-perforated magnetic recording film. (1.2) This standard also specifies the reproducing velocity of the film travel. | Active · Stabilized | 2004-11-08 |
200-Mil Center-Position Magnetic Audio Record This standard specifies the position, dimensions, and reproducing speed of the nominal 5.08-mm (0.200-in) center-position magnetic audio record on 16-mm motion-picture film. | Active · Stabilized | 1996-04-08 |
Perforated 8-mm Type R, 2R This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with two rows of 8-mm type R perforations and a perforation pitch of either 0.1500 in or 0.1497 in (3.810 mm or 3.802 mm). The width of the 8-mm strip after processing and slitting is…This standard specifies the cutting and perforating dimensions for 16-mm motion-picture film with two rows of 8-mm type R perforations and a perforation pitch of either 0.1500 in or 0.1497 in (3.810 mm or 3.802 mm). The width of the 8-mm strip after processing and slitting is also specified. | Active · Stabilized | 2004-11-08 |
Manufacturer-Printed Latent Image Identification Information (1.1) This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also specifies the encoding format to be used for these…(1.1) This standard specifies the position and dimensions of machine-readable identification numbers. These numbers are intended to be a machine-readable version of the latent image key number. This standard also specifies the encoding format to be used for these machine-readable numbers, as well as the area scanned and the spectral characteristics of the scanner. (1.2) This standard also specifies the position, dimensions, and content of human-readable identification (key) numbers for use on 16-mm motion-picture films intended for original photography or intermediate printing which also include the machine-readable key number described in 1.1. These numbers normally will be exposed onto the film at the time of manufacture. (1.3) This standard further specifies an area that may be used for optional manufacturer-specific film-type identification information. (1.4) This standard also specifies an area on the film which is not to be exposed by the film manufacturer, thus leaving it available for customer data recording. | Active · Stabilized | 2008-10-10 |