{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-05-23T07:02:55.500Z",
  "sourcePath": "src/main/data/docs",
  "docId": "SMPTE.ST2082-1.2015",
  "document": {
    "abstract": "This standard describes the electrical and physical characteristics of a 12G-SDI coaxial cable interface suitable for applications where the signal loss does not exceed an amount specified by the receiver manufacturer. Typical loss amounts would be in the range of up to 40 dB at one-half the clock frequency.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "approvalDate": "2015",
    "approvalDate$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      },
      "year": "2015",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "depositDate": "2015-03-19",
    "depositDate$meta": {
      "confidence": "high",
      "note": "Source XML <publication_date> — appears to be SMPTE/IEEE Xplore deposit date, distinct from actual publicationDate (from _source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-13T21:13:37.613Z"
    },
    "docId": "SMPTE.ST2082-1.2015",
    "docId$meta": {
      "confidence": "high",
      "note": "Calculated from parsed/inferred metadata",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "docLabel": "SMPTE ST 2082-1:2015",
    "docLabel$meta": {
      "confidence": "high",
      "note": "Constructed from parsed/inferred typenumber/number/date",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "docNumber": "2082",
    "docNumber$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubNumber meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "docPart": "1",
    "docPart$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubPart meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "docSuiteTitle": "12G-SDI",
    "docSuiteTitle$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubSuiteTitle meta tag, or derived from wrapper title for PDF releases",
      "originalValue": null,
      "source": "parsed",
      "updated": "2025-12-12T21:32:28.581Z",
      "version": "extractDocs.js@commit:e5213a0e988e"
    },
    "docTitle": "Electrical",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubTitle, or derived from wrapper title for PDF releases",
      "originalValue": "12G-SDI — Electrical",
      "overridden": true,
      "source": "parsed",
      "updated": "2025-12-12T21:32:28.581Z",
      "version": "extractDocs.js@commit:e5213a0e988e"
    },
    "docType": "Standard",
    "docType$meta": {
      "confidence": "high",
      "note": "Publication type parsed from HTML",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "doi": "10.5594/SMPTE.ST2082-1.2015",
    "doi$meta": {
      "confidence": "medium",
      "note": "Constructed from parsed/inferred type/date",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "familyId": "2082-1",
    "familyId$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "group": "smpte-32nf-tc",
    "group$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "href": "https://doi.org/10.5594/SMPTE.ST2082-1.2015",
    "href$meta": {
      "confidence": "high",
      "note": "URL generated and verified via redirect resolution",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "icsCodes": [
      {
        "code": "33.160.01",
        "description": "Audio, video and audiovisual systems in general"
      },
      {
        "code": "33.170",
        "description": "Television and radio broadcasting"
      }
    ],
    "icsCodes$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "isbn": "978-1-61482-859-4",
    "isbn$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "keywords": [
      "Communication",
      "Networking and Broadcast Technologies",
      "Interfaces",
      "Television",
      "UHDTV",
      "Interface",
      "SDI"
    ],
    "keywords$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "pages": "1–14",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "productNumber": "SSD001833",
    "productNumber$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "publicationDate": "2015-02-04",
    "publicationDate$meta": {
      "confidence": "high",
      "excludeChanges": true,
      "note": "Parsed from HTML pubDateTime meta tag | TRIAGE: Registry matches releaseTag (gospel); source XML date appears to be SMPTE-IEEE Xplore deposit date, not publication",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2026-05-13T21:13:37.613Z"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Parsed from HTML publisher meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "references": {
      "bibliographic": [
        "SMPTE.EG34.2004",
        "SMPTE.RP157.2012",
        "SMPTE.RP198.1998",
        "SMPTE.ST292-1.2012",
        "SMPTE.ST2082-0.2015"
      ],
      "bibliographic$meta": {
        "confidence": "high",
        "note": "Extracted from sibling -ref.xml via extractSmpteSourceRefs.js",
        "source": "parsed",
        "updated": "2026-05-19T00:07:42.123Z"
      },
      "normative": [
        "SMPTE.ST2082-10.2015",
        "SMPTE.RP184.2004",
        "IEC.61169-8",
        "IEC.61169-29"
      ],
      "normative$meta": {
        "confidence": "high",
        "note": "Extracted from sibling -ref.xml via extractSmpteSourceRefs.js",
        "source": "parsed",
        "updated": "2026-05-18T22:27:13.218Z"
      }
    },
    "releaseTag": "20150204-pub",
    "releaseTag$meta": {
      "confidence": "high",
      "note": "Release tag parsed from URL folder structure",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
      "updated": "2025-10-26T21:41:25.116Z"
    },
    "resolvedHref": "https://pub.smpte.org/doc/st2082-1/20150204-pub/",
    "resolvedHref$meta": {
      "confidence": "high",
      "note": "Final URL resolved via URL redirect verification",
      "originalValue": "https://my.smpte.org/s/product-details?id=a1BVR0000007Ndu",
      "overridden": true,
      "source": "resolved",
      "updated": "2025-11-11T04:51:59.312Z",
      "version": "extractDocs.js@commit:dea962f9e9d7"
    },
    "standardId": "20599",
    "standardId$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2082-1-2015_1/st2082-1-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "status": {
      "active": false,
      "active$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s) and other status values",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "amended": true,
      "amended$meta": {
        "confidence": "high",
        "note": "Parsed from wrapper #amendments",
        "originalValue": null,
        "source": "parsed",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "amendedBy": [
        "SMPTE.ST2082-1.2015Am1.2016"
      ],
      "amendedBy$meta": {
        "confidence": "high",
        "note": "Parsed from wrapper #amendment",
        "originalValue": [],
        "source": "parsed",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "latestVersion": false,
      "latestVersion$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "superseded": true,
      "superseded$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "supersededBy": [
        "SMPTE.ST2082-1.2023-11"
      ],
      "supersededBy$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": [],
        "source": "resolved",
        "updated": "2025-10-26T21:41:25.116Z"
      },
      "supersededDate": "2023-11-15",
      "supersededDate$meta": {
        "confidence": "high",
        "note": "Calculated as the publication date of the next base release (from releaseTag)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:25.116Z"
      }
    }
  }
}