{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-06-23T16:57:17.111Z",
  "sourcePath": "src/main/data/docs",
  "docId": "SMPTE.ST2081-10.2015",
  "document": {
    "abstract": "This Standard defines the mapping of: • Mode 1: 2160-line Source image formats identified in Table 1 into a Single-link 6 Gb/s [nominal] SDI bit-serial interface • Mode 2: 1080-line Source image formats identified in Table 6 and into a Single-link 6 Gb/s [nominal] SDI bit-serial interface — This Standard also defines the carriage of ancillary data, and the SMPTE ST 352 payload ID's for the Single-link 6 Gb/s SDI interface. — It is not necessary for implementations to include support for all operating modes or image formats that are included in this standard. Implementers should indicate supported operating modes and image formats in commercial publications.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "approvalDate": "2015-02-04",
    "approvalDate$meta": {
      "confidence": "high",
      "note": "Cross-filled from Zoho standards export (_source/SMPTE/Zoho/SMPTE Standards Document Zoho Export 2026-05-21.json); Zoho is canonical for SMPTE standards metadata, registry value overwritten",
      "originalValue": "2015",
      "overridden": true,
      "source": "parsed",
      "updated": "2026-06-15T20:27:42.872Z",
      "version": "smpte-zoho-standards@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      },
      "year": "2015",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "depositDate": "2015-03-19",
    "depositDate$meta": {
      "confidence": "high",
      "note": "Source XML <publication_date> — appears to be SMPTE/IEEE Xplore deposit date, distinct from actual publicationDate (from _source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-13T21:13:37.613Z"
    },
    "docId": "SMPTE.ST2081-10.2015",
    "docId$meta": {
      "confidence": "high",
      "note": "Calculated from parsed/inferred metadata",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "docLabel": "SMPTE ST 2081-10:2015",
    "docLabel$meta": {
      "confidence": "high",
      "note": "Constructed from parsed/inferred typenumber/number/date",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "docNumber": "2081",
    "docNumber$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubNumber meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "docPart": "10",
    "docPart$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubPart meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "docSuiteTitle": "6G-SDI",
    "docSuiteTitle$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubSuiteTitle meta tag, or derived from wrapper title for PDF releases",
      "originalValue": null,
      "source": "parsed",
      "updated": "2025-12-12T21:32:21.293Z",
      "version": "extractDocs.js@commit:e5213a0e988e"
    },
    "docTitle": "2160-line and 1080-line Source Image and Ancillary Data Mapping for 6G-SDI",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from HTML pubTitle, or derived from wrapper title for PDF releases",
      "originalValue": "6G-SDI — 2160-line and 1080-line Source Image and Ancillary Data Mapping for 6G-SDI",
      "overridden": true,
      "source": "parsed",
      "updated": "2025-12-12T21:32:21.293Z",
      "version": "extractDocs.js@commit:e5213a0e988e"
    },
    "docType": "Standard",
    "docType$meta": {
      "confidence": "high",
      "note": "Publication type parsed from HTML",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "doi": "10.5594/SMPTE.ST2081-10.2015",
    "doi$meta": {
      "confidence": "medium",
      "note": "Constructed from parsed/inferred type/date",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "familyId": "2081-10",
    "familyId$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "group": "smpte-32nf-tc",
    "group$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "href": "https://doi.org/10.5594/SMPTE.ST2081-10.2015",
    "href$meta": {
      "confidence": "high",
      "note": "URL generated and verified via redirect resolution",
      "originalValue": null,
      "source": "resolved",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "icsCodes": [
      {
        "code": "33.160.01",
        "description": "Audio, video and audiovisual systems in general"
      },
      {
        "code": "33.170",
        "description": "Television and radio broadcasting"
      }
    ],
    "icsCodes$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "isbn": "978-1-61482-857-0",
    "isbn$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "keywords": [
      "Communication",
      "Networking and Broadcast Technologies",
      "Interfaces",
      "Television",
      "UHDTV",
      "SDI"
    ],
    "keywords$meta": {
      "confidence": "high",
      "note": "Scrubbed against src/main/config/site.json controlledKeywords (auto-fix renames + drop noise)",
      "originalValue": [
        "Communication",
        "Networking and Broadcast Technologies",
        "Interfaces",
        "Television",
        "UHDTV",
        "Interface",
        "SDI"
      ],
      "source": "parsed",
      "updated": "2026-06-17T17:24:10.972Z",
      "version": "kw-scrub@v1"
    },
    "numberOfPages": "22",
    "numberOfPages$meta": {
      "confidence": "high",
      "note": "Cross-filled from Zoho standards export (_source/SMPTE/Zoho/SMPTE Standards Document Zoho Export 2026-05-21.json)",
      "source": "parsed",
      "updated": "2026-06-15T20:12:21.844Z",
      "version": "smpte-zoho-standards@v1"
    },
    "pages": "1–22",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "productNumber": "SSD001831",
    "productNumber$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "publicationDate": "2015-02-04",
    "publicationDate$meta": {
      "confidence": "high",
      "excludeChanges": true,
      "note": "Parsed from HTML pubDateTime meta tag | TRIAGE: Registry matches releaseTag (gospel); source XML date appears to be SMPTE-IEEE Xplore deposit date, not publication",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2026-05-13T21:13:37.613Z"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Parsed from HTML publisher meta tag",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
        "source": "parsed",
        "updated": "2026-05-12T21:55:08.850Z"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "references": {
      "bibliographic": [
        "SMPTE.ST12-1.2014",
        "SMPTE.ST12-2.2014",
        "SMPTE.RP157.2012",
        "SMPTE.ST274.2008",
        "SMPTE.ST291-1.2011",
        "SMPTE.RP291-2.2013",
        "SMPTE.ST299-1.2009",
        "SMPTE.ST299-2.2010",
        "SMPTE.ST372.2011",
        "SMPTE.ST424.2012",
        "SMPTE.ST425-1.2014",
        "SMPTE.ST428-11.2013",
        "SMPTE.ST2036-1.2014",
        "SMPTE.ST2048-1.2011",
        "SMPTE.ST2051.2014"
      ],
      "bibliographic$meta": {
        "confidence": "high",
        "note": "Extracted from sibling -ref.xml via extractSmpteSourceRefs.js",
        "source": "parsed",
        "updated": "2026-05-18T22:27:13.218Z"
      },
      "normative": [
        "SMPTE.ST352.2013",
        "SMPTE.ST425-3.2014"
      ],
      "normative$meta": {
        "confidence": "high",
        "note": "Extracted from sibling -ref.xml via extractSmpteSourceRefs.js",
        "source": "parsed",
        "updated": "2026-05-18T22:27:13.218Z"
      }
    },
    "releaseTag": "20150204-pub",
    "releaseTag$meta": {
      "confidence": "high",
      "note": "Release tag parsed from URL folder structure",
      "originalValue": null,
      "source": "parsed",
      "sourceUrl": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
      "updated": "2025-10-26T21:41:22.534Z"
    },
    "resolvedHref": "https://pub.smpte.org/doc/st2081-10/20150204-pub/",
    "resolvedHref$meta": {
      "confidence": "high",
      "note": "Final URL resolved via URL redirect verification",
      "originalValue": "https://my.smpte.org/s/product-details?id=a1BVR0000008kac",
      "overridden": true,
      "source": "resolved",
      "updated": "2025-11-11T04:51:56.377Z",
      "version": "extractDocs.js@commit:dea962f9e9d7"
    },
    "standardId": "20595",
    "standardId$meta": {
      "confidence": "high",
      "note": "Parsed from sibling XML (_source/SMPTE/APTARA/DL Project Files/08262015 STANDARDS REVISED DEPOSIT/smptes_st-2081-10-2015_1/st2081-10-2015.xml)",
      "source": "parsed",
      "updated": "2026-05-12T21:55:08.850Z"
    },
    "status": {
      "active": false,
      "active$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s) and other status values",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:22.534Z"
      },
      "amended": false,
      "amended$meta": {
        "confidence": "high",
        "note": "Parsed from wrapper #amendments",
        "originalValue": null,
        "source": "parsed",
        "updated": "2025-10-26T21:41:22.534Z"
      },
      "latestVersion": false,
      "latestVersion$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:22.534Z"
      },
      "superseded": true,
      "superseded$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:22.534Z"
      },
      "supersededBy": [
        "SMPTE.ST2081-10.2018"
      ],
      "supersededBy$meta": {
        "confidence": "high",
        "note": "Calculated from the releaseTag(s)",
        "originalValue": [],
        "source": "resolved",
        "updated": "2025-10-26T21:41:22.534Z"
      },
      "supersededDate": "2018-01-02",
      "supersededDate$meta": {
        "confidence": "high",
        "note": "Calculated as the publication date of the next base release (from releaseTag)",
        "originalValue": null,
        "source": "resolved",
        "updated": "2025-10-26T21:41:22.534Z"
      }
    }
  }
}