{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-07-09T21:16:49.031Z",
  "sourcePath": "src/main/data/docs",
  "docId": "10.5594-J18182XY",
  "document": {
    "abbrevTitle": "J SMPTE",
    "abbrevTitle$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "abstract": "When time-motion curves are plotted from high-speed films, the feeding steps of the tracing paper must be exactly proportional to the time interval between frames. Ordinarily the length of each feeding step must be determined by a preliminary measurement of the frame rate. This inconvenience is avoided by the procedure described here, which consists in photographing on each frame of the film a timing instrument with a rotating scale. The film analyzer is equipped with a duplicate of the timer dial, and the rotation of this duplicate dial is proportional to the movement of the tracing paper. As the film is advanced from one frame to the next, the paper is advanced independently until the dial on the analyzer stands at the same position as the image of the dial on the new frame of the film. The feeding step of the tracing paper is thus automatically proportional to the time interval between the new frame and the preceding one. The ratio of the rotation of the dial to the linear feed of the paper can be varied to give any desired time scale for the resulting time-motion curve.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J18182.xml) · Cross-merged from same-article DOI twin 10.5594-J18182",
      "source": "parsed",
      "updated": "2026-06-17T22:53:45.290Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "authors": [
      {
        "name": "Franz Topfer"
      }
    ],
    "authors$meta": {
      "confidence": "high",
      "note": "Object form (schema 2.3.0) migrated from string form via migrateAuthorsToObjectForm.js",
      "source": "parsed",
      "updated": "2026-06-23T00:04:25.562Z",
      "version": "authors-migrate-object-form@v1"
    },
    "contentType": "orig-research",
    "contentType$meta": {
      "confidence": "high",
      "note": "Reclassified from info-society by title review (2026-07-09, infoSocietyReview.md): 'orig-research'",
      "originalValue": "info-society",
      "source": "resolved",
      "updated": "2026-07-09T19:37:05.512Z",
      "version": "contenttype-fixes@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      },
      "year": "1962",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "docId": "10.5594-J18182XY",
    "docId$meta": {
      "confidence": "high",
      "note": "Derived from DOI 10.5594/J18182XY",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "docLabel": "Journal of the SMPTE ( Volume: 71, Issue: 1A, 1962)",
    "docLabel$meta": {
      "confidence": "medium",
      "note": "Composed from journal title, volume, issue and date",
      "source": "inferred",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "docTitle": "Paper M–7: A Method of Analyzing High-Speed Films",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "docType": "Journal Article",
    "docType$meta": {
      "confidence": "high",
      "note": "journal_metadata XML — SMPTE journal paper",
      "source": "inferred",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "doi": "10.5594/J18182XY",
    "doi$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "href": "https://doi.org/10.5594/J18182XY",
    "href$meta": {
      "confidence": "high",
      "note": "Constructed from DOI 10.5594/J18182XY",
      "source": "inferred",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "issn": {
      "print": "0361-4573",
      "print$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "issn$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "journalAcronym": "MIJR",
    "journalAcronym$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "journalTitle": "Journal of the SMPTE",
    "journalTitle$meta": {
      "confidence": "high",
      "note": "Era-accurate journal title from SMPTE canonical repository (periodical parent at time of publication) (smpte-canonical-audit/canonicalLibrary.*.json)",
      "originalValue": null,
      "source": "parsed",
      "updated": "2026-07-08T00:35:38.133Z",
      "version": "smpte-canonical-repo@v1"
    },
    "number": "1A",
    "number$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "pages": "486–487",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "publicationDate": "1962-01-01",
    "publicationDate$meta": {
      "confidence": "low",
      "note": "Month/day absent in source — padded to 01-01",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Normalised to registry \"SMPTE\" convention from publisher-name (SMPTE)",
      "source": "inferred",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "resolvedHref": "https://journal.smpte.org/periodicals/Journal%20of%20the%20SMPTE/71/1A/135/",
    "resolvedHref$meta": {
      "confidence": "high",
      "note": "Backfilled from url.validate report #resolvedHref",
      "originalValue": null,
      "source": "resolved",
      "updated": "2026-06-19T20:59:07.437Z"
    },
    "status": {
      "active": true,
      "active$meta": {
        "confidence": "high",
        "note": "Mapped from article_status=\"active\"",
        "source": "parsed",
        "updated": "2026-05-22T23:54:08.922Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "volume": "71",
    "volume$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/10012015 BACKFILE JOURNAL REVISED/smptej_71_1A/MIJR15Vol71No1A.xml)",
      "source": "parsed",
      "updated": "2026-05-22T23:54:08.922Z",
      "version": "smpte-journal-issue-xml@v1"
    }
  }
}