{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-06-17T23:49:39.838Z",
  "sourcePath": "src/main/data/docs",
  "docId": "10.5594-J17823",
  "document": {
    "abbrevTitle": "J SMPE",
    "abbrevTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "abstract": "Many methods have been proposed to replace the geometrical f ratio by an effective calibration which takes the transmittance of the lens into consideration, but no method proposed so far has been accepted. The author outlines a new method of photoelectric lens calibration using the null method which compares the lens to be calibrated to a standard lens. This standard can be easily reproduced with a very high uniformity of performance. The method has been tested very thoroughly and is now in practical use for lens calibration. The accuracy obtained with this method is far superior to any procedure used so far. Its simplicity enables even an unskilled operator to obtain accurate results combined with a high working speed.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "articleType": "research-article",
    "articleType$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "authors": [
      "F. G. Back"
    ],
    "authors$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
        "source": "parsed",
        "updated": "2026-05-22T21:44:19.125Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "year": "1947",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
        "source": "parsed",
        "updated": "2026-05-22T21:44:19.125Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docId": "10.5594-J17823",
    "docId$meta": {
      "confidence": "high",
      "note": "Derived from DOI 10.5594/J17823",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docLabel": "Journal of the Society of Motion Picture Engineers ( Volume: 49, Issue: 2, August 1947)",
    "docLabel$meta": {
      "confidence": "medium",
      "note": "Composed from venue title, volume/issue and date",
      "source": "inferred",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docTitle": "A Simplified Method for Precision Calibration of Effective f Stops",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docType": "Journal Article",
    "docType$meta": {
      "confidence": "high",
      "note": "NLM <article> — SMPTE journal paper",
      "source": "inferred",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "doi": "10.5594/J17823",
    "doi$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "href": "https://doi.org/10.5594/J17823",
    "href$meta": {
      "confidence": "high",
      "note": "Constructed from DOI 10.5594/J17823",
      "source": "inferred",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "issn": {
      "print": "0097-5834",
      "print$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
        "source": "parsed",
        "updated": "2026-05-22T21:44:19.125Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "issn$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "journalAcronym": "MIJR",
    "journalAcronym$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_49_2/MIJR15Vol49No2.xml)",
      "source": "parsed",
      "updated": "2026-06-17T00:17:09.425Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "number": "2",
    "number$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "pages": "122–130",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publicationDate": "1947-08-01",
    "publicationDate$meta": {
      "confidence": "high",
      "note": "Day absent in NLM source — padded to 01",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)",
      "source": "inferred",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
        "source": "parsed",
        "updated": "2026-05-22T21:44:19.125Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_49_2/MIJR15Vol49No2.xml)",
        "source": "parsed",
        "updated": "2026-06-17T00:17:09.425Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "status": {
      "active": true,
      "active$meta": {
        "confidence": "medium",
        "note": "No explicit status in NLM source — journal papers default active",
        "source": "inferred",
        "updated": "2026-05-22T21:44:19.125Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "volume": "49",
    "volume$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J17823.xml)",
      "source": "parsed",
      "updated": "2026-05-22T21:44:19.125Z",
      "version": "smpte-journal-article-nlm@v1"
    }
  }
}