{ "$schema": "/api/schemas/documents.schema.json", "apiVersion": "1.0.0", "generatedAt": "2026-06-17T23:49:39.838Z", "sourcePath": "src/main/data/docs", "docId": "10.5594-J16681", "document": { "abbrevTitle": "J SMPTE", "abbrevTitle$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "abstract": "Work on the commercial development of a 70mm, 15-perforation motion-picture projector has resulted in the production of four prototype mechanisms. One of these, installed in the Fuji Pavilion at Expo '70, employs a 25,000-W xenon short-arc lamp to project a 15-min, multiple-image motion picture on a screen measuring 43 by 62 ft. One of the difficult technical problems that had to be solved was how to advance the film at 15 perforations/frame, 24 frames/s, with a pulldown time of less than 10 ms, while simultaneously achieving good registration, good film life and mechanical reliability. Possibilities of excessive accelerations and impact forces on the film were matters of concern. The solutions, obtained from mathematical analyses and observations of prototype operation, involved appropriate film-guide design, the use of air jets to assist in forming and picking up the loops, and the incorporation of a mechanical device for producing controlled and accurate registration without perforation damage. A description is given of the behavior of the film as the rolling loop forms, grows, moves toward the gate where the registration takes place, shrinks and finally disappears.", "abstract$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "articleType": "research-article", "articleType$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "authors": [ "William C. Shaw" ], "authors$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "copyright": { "holder": "Society of Motion Picture and Television Engineers, Inc.", "holder$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "year": "1970", "year$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" } }, "copyright$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "docId": "10.5594-J16681", "docId$meta": { "confidence": "high", "note": "Derived from DOI 10.5594/J16681", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "docLabel": "Journal of the SMPTE ( Volume: 79, Issue: 9, September 1970)", "docLabel$meta": { "confidence": "medium", "note": "Composed from venue title, volume/issue and date", "source": "inferred", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "docTitle": "Film Dynamics of a Rolling-Loop Film-Transport System", "docTitle$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "docType": "Journal Article", "docType$meta": { "confidence": "high", "note": "NLM
— SMPTE journal paper", "source": "inferred", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "doi": "10.5594/J16681", "doi$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "href": "https://doi.org/10.5594/J16681", "href$meta": { "confidence": "high", "note": "Constructed from DOI 10.5594/J16681", "source": "inferred", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "issn": { "print": "0361-4573", "print$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" } }, "issn$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "journalAcronym": "MIJR", "journalAcronym$meta": { "confidence": "high", "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/07302015 IBP DEPOSITS/Journal-256-Issues/smptej_79_9/MIJR15Vol79No9.xml)", "source": "parsed", "updated": "2026-06-17T00:17:09.425Z", "version": "smpte-journal-issue-xml@v1" }, "number": "9", "number$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "pages": "778–782", "pages$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "publicationDate": "1970-09-01", "publicationDate$meta": { "confidence": "high", "note": "Day absent in NLM source — padded to 01", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "publisher": "SMPTE", "publisher$meta": { "confidence": "high", "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)", "source": "inferred", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "publisherLocation": { "city": "White Plains, NY", "city$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "country": "USA", "country$meta": { "confidence": "high", "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/07302015 IBP DEPOSITS/Journal-256-Issues/smptej_79_9/MIJR15Vol79No9.xml)", "source": "parsed", "updated": "2026-06-17T00:17:09.425Z", "version": "smpte-journal-issue-xml@v1" } }, "publisherLocation$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" }, "status": { "active": true, "active$meta": { "confidence": "medium", "note": "No explicit status in NLM source — journal papers default active", "source": "inferred", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" } }, "volume": "79", "volume$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J16681.xml)", "source": "parsed", "updated": "2026-05-22T21:44:19.125Z", "version": "smpte-journal-article-nlm@v1" } } }