{
"$schema": "/api/schemas/documents.schema.json",
"apiVersion": "1.0.0",
"generatedAt": "2026-06-17T23:49:39.838Z",
"sourcePath": "src/main/data/docs",
"docId": "10.5594-J12456",
"document": {
"abstract": "ONE of the most important requisites of a motion picture taking lens is speed. This is, in plain words, the ability to produce on the sensitive film that density which is necessary to produce a useful picture. This speed is given, generally, as the ratio of aperture to E. F.2 The greater the diameter of the effective aperture for the same E. F., the more light passes through the lens, and the shorter is the necessary exposure. Strictly speaking, however, the speed as defined by the aperture ratio is not alone the determining factor for the density of the plate, because the latter depends to some considerable extent upon the number of reflecting surfaces occurring in the objective and upon the kind of glass used. I may refer here to a paper which I read in the Dayton Meeting of this Society in October, 1920. It may therefore happen, that two lenses of the same f value differ in effective speed, and it is also possible that a lens of smaller f value may have the same and even a greater effective speed than another one of higher f value.",
"abstract$meta": {
"confidence": "high",
"note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08202015 BACKFILE JOURNAL FRESH/smptej_6_14/MIJR15Vol6No14.xml)",
"source": "parsed",
"updated": "2026-06-16T18:14:32.753Z",
"version": "smpte-journal-issue-xml@v1"
},
"articleType": "research-article",
"articleType$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"authors": [
"Herman Kellner"
],
"authors$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"copyright": {
"holder": "Society of Motion Picture and Television Engineers, Inc.",
"holder$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"year": "1922",
"year$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
}
},
"copyright$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"docId": "10.5594-J12456",
"docId$meta": {
"confidence": "high",
"note": "Derived from DOI 10.5594/J12456",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"docLabel": "Transactions of the Society of Motion Picture Engineers ( Volume: 6, Issue: 14, May 1922)",
"docLabel$meta": {
"confidence": "medium",
"note": "Composed from venue title, volume/issue and date",
"source": "inferred",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"docTitle": "Some Applications of Aspherical Lenses in Motion Picture Work",
"docTitle$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"docType": "Journal Article",
"docType$meta": {
"confidence": "high",
"note": "NLM — SMPTE journal paper",
"source": "inferred",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"doi": "10.5594/J12456",
"doi$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"href": "https://doi.org/10.5594/J12456",
"href$meta": {
"confidence": "high",
"note": "Constructed from DOI 10.5594/J12456",
"source": "inferred",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"issn": {
"print": "0096-6460",
"print$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
}
},
"issn$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"journalAcronym": "MIJR",
"journalAcronym$meta": {
"confidence": "high",
"note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08202015 BACKFILE JOURNAL FRESH/smptej_6_14/MIJR15Vol6No14.xml)",
"source": "parsed",
"updated": "2026-06-16T18:14:32.753Z",
"version": "smpte-journal-issue-xml@v1"
},
"number": "14",
"number$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"pages": "85–99",
"pages$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"publicationDate": "1922-05-01",
"publicationDate$meta": {
"confidence": "high",
"note": "Day absent in NLM source — padded to 01",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"publisher": "SMPTE",
"publisher$meta": {
"confidence": "high",
"note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)",
"source": "inferred",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"publisherLocation": {
"city": "White Plains, NY",
"city$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"country": "USA",
"country$meta": {
"confidence": "high",
"note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08202015 BACKFILE JOURNAL FRESH/smptej_6_14/MIJR15Vol6No14.xml)",
"source": "parsed",
"updated": "2026-06-16T18:14:32.753Z",
"version": "smpte-journal-issue-xml@v1"
}
},
"publisherLocation$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
},
"status": {
"active": true,
"active$meta": {
"confidence": "medium",
"note": "No explicit status in NLM source — journal papers default active",
"source": "inferred",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
}
},
"volume": "6",
"volume$meta": {
"confidence": "high",
"note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J12456.xml)",
"source": "parsed",
"updated": "2026-05-22T20:40:11.684Z",
"version": "smpte-journal-article-nlm@v1"
}
}
}