{ "$schema": "/api/schemas/documents.schema.json", "apiVersion": "1.0.0", "generatedAt": "2026-06-17T23:49:39.838Z", "sourcePath": "src/main/data/docs", "docId": "10.5594-J09163", "document": { "abstract": "The technical quality of film programs can reach an optimum only if the film and the television systems are properly adapted to each other. From the given requirements of a television system, desirable properties of film, with regard to contrast, transmission characteristics, resolution and graininess, can also be derived. Stable and nearly optimum performance in television can be obtained if contrast is kept smaller than with optical projection, and if closer tolerances are set to the transfer characteristics of the film. Technical specifications and measuring methods have been developed to meet these ends. Equipment has been designed to measure the density range (transfer characteristic), resolution (depth of modulation), and graininess (SNR) of films by methods comparable to television scanning. The introduction of technical specifications for television films and of uniform adjusting methods for the telecine chain led to stable conditions at the film transmitting. The standards for synchronous sound recording at shooting, editing, and at transmission are briefly discussed, and a new single film standard, 35 Commag, is recommended for prints to be transmitted.", "abstract$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "articleType": "research-article", "articleType$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "authors": [ "Karl-Erik Gondesen" ], "authors$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "copyright": { "holder": "Society of Motion Picture and Television Engineers, Inc.", "holder$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "year": "1967", "year$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" } }, "copyright$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "docId": "10.5594-J09163", "docId$meta": { "confidence": "high", "note": "Derived from DOI 10.5594/J09163", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "docLabel": "Journal of the SMPTE ( Volume: 76, Issue: 4, April 1967)", "docLabel$meta": { "confidence": "medium", "note": "Composed from journal title, volume, issue and date", "source": "inferred", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "docTitle": "Technical Specifications for Television Films in the Federal Republic of Germany", "docTitle$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "docType": "Journal Article", "docType$meta": { "confidence": "high", "note": "NLM
— SMPTE journal paper", "source": "inferred", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "doi": "10.5594/J09163", "doi$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "href": "https://doi.org/10.5594/J09163", "href$meta": { "confidence": "high", "note": "Constructed from DOI 10.5594/J09163", "source": "inferred", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "issn": { "print": "0361-4573", "print$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" } }, "issn$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "journalAcronym": "MIJR", "journalAcronym$meta": { "confidence": "high", "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_76_4/MIJR15Vol76No4.xml)", "source": "parsed", "updated": "2026-06-16T16:11:59.617Z", "version": "smpte-journal-issue-xml@v1" }, "number": "4", "number$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "pages": "335–340", "pages$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "publicationDate": "1967-04-01", "publicationDate$meta": { "confidence": "high", "note": "Day absent in NLM source — padded to 01", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "publisher": "SMPTE", "publisher$meta": { "confidence": "high", "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)", "source": "inferred", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "publisherLocation": { "city": "White Plains, NY", "city$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "country": "USA", "country$meta": { "confidence": "high", "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_76_4/MIJR15Vol76No4.xml)", "source": "parsed", "updated": "2026-06-16T16:11:59.617Z", "version": "smpte-journal-issue-xml@v1" } }, "publisherLocation$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" }, "status": { "active": true, "active$meta": { "confidence": "medium", "note": "No explicit status in NLM source — journal articles default active", "source": "inferred", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" } }, "volume": "76", "volume$meta": { "confidence": "high", "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J09163.xml)", "source": "parsed", "updated": "2026-05-22T19:19:44.900Z", "version": "smpte-journal-article-nlm@v1" } } }