{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-06-17T23:49:39.838Z",
  "sourcePath": "src/main/data/docs",
  "docId": "10.5594-J05676",
  "document": {
    "abbrevTitle": "J SMPTE",
    "abbrevTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "abstract": "The subject of narrow-tooth sprockets and the continued release of prints, primarily with wide perforations, was discussed at length. It was reported that about ten theaters had changed back to wide-tooth sprockets because there was nothing on the market but wide perforation film. This change was reported to have been spurred by an unusual amount of film damage. The discussion continued and it was requested that the Committee investigate the possibility of establishing the small perforation as the standard for release prints. The consensus of those present, however, was that such a proposed change could not be handled by the laboratories. While these facilities are able to manufacture some prints with narrow perforations, their ability or capacity to manufacture all release prints with perforations conforming to PH22.102 is currently impossible.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_81_1/MIJR15Vol81No1.xml)",
      "source": "parsed",
      "updated": "2026-06-16T16:11:59.617Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "articleType": "research-article",
    "articleType$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "authors": [
      "Paul H. Preo"
    ],
    "authors$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
        "source": "parsed",
        "updated": "2026-05-22T19:19:44.900Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "year": "1972",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
        "source": "parsed",
        "updated": "2026-05-22T19:19:44.900Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docId": "10.5594-J05676",
    "docId$meta": {
      "confidence": "high",
      "note": "Derived from DOI 10.5594/J05676",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docLabel": "Journal of the SMPTE ( Volume: 81, Issue: 1, January 1972)",
    "docLabel$meta": {
      "confidence": "medium",
      "note": "Composed from journal title, volume, issue and date",
      "source": "inferred",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docTitle": "Film Projection Practice Committee Report",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docType": "Journal Article",
    "docType$meta": {
      "confidence": "high",
      "note": "NLM <article> — SMPTE journal paper",
      "source": "inferred",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "doi": "10.5594/J05676",
    "doi$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "href": "https://doi.org/10.5594/J05676",
    "href$meta": {
      "confidence": "high",
      "note": "Constructed from DOI 10.5594/J05676",
      "source": "inferred",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "issn": {
      "print": "0361-4573",
      "print$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
        "source": "parsed",
        "updated": "2026-05-22T19:19:44.900Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "issn$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "journalAcronym": "MIJR",
    "journalAcronym$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_81_1/MIJR15Vol81No1.xml)",
      "source": "parsed",
      "updated": "2026-06-16T16:11:59.617Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "number": "1",
    "number$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "pages": "40–41",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publicationDate": "1972-01-01",
    "publicationDate$meta": {
      "confidence": "high",
      "note": "Day absent in NLM source — padded to 01",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)",
      "source": "inferred",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
        "source": "parsed",
        "updated": "2026-05-22T19:19:44.900Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_81_1/MIJR15Vol81No1.xml)",
        "source": "parsed",
        "updated": "2026-06-16T16:11:59.617Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "status": {
      "active": true,
      "active$meta": {
        "confidence": "medium",
        "note": "No explicit status in NLM source — journal articles default active",
        "source": "inferred",
        "updated": "2026-05-22T19:19:44.900Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "volume": "81",
    "volume$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J05676.xml)",
      "source": "parsed",
      "updated": "2026-05-22T19:19:44.900Z",
      "version": "smpte-journal-article-nlm@v1"
    }
  }
}