{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-06-17T23:49:39.838Z",
  "sourcePath": "src/main/data/docs",
  "docId": "10.5594-J00985",
  "document": {
    "abbrevTitle": "J SMPTE",
    "abbrevTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "abstract": "The performance of carbons operated in the Gretener type of “blown arc” shows the following advantages as compared with the more usual method of burning: (a) from 5 to 25% less current is required to produce the same light; (b) at the higher brightness levels, less carbon consumption is required for the same light; (c) the maximum light that the carbon will deliver is increased by 10 to 20%; and (d) uniformity of brightness across the face of the arc crater is considerably improved. The performance advantages of the “blown arc” seem to be considerably greater for 12-mm than for 10-mm carbons, and are greatest when the carbon is operated at or near its maximum current and light output. The addition of blowing to the arc introduces special problems regarding the design and operation of the negative electrode.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "articleType": "research-article",
    "articleType$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "authors": [
      "C. E. Greider"
    ],
    "authors$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "year": "1953",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docId": "10.5594-J00985",
    "docId$meta": {
      "confidence": "high",
      "note": "Derived from DOI 10.5594/J00985",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docLabel": "Journal of the Society of Motion Picture and Television Engineers ( Volume: 61, Issue: 4, October 1953)",
    "docLabel$meta": {
      "confidence": "medium",
      "note": "Composed from journal title, volume, issue and date",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docTitle": "Performance of High-Intensity Carbons in the Blown Arc",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docType": "Journal Article",
    "docType$meta": {
      "confidence": "high",
      "note": "NLM <article> — SMPTE journal paper",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "doi": "10.5594/J00985",
    "doi$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "href": "https://doi.org/10.5594/J00985",
    "href$meta": {
      "confidence": "high",
      "note": "Constructed from DOI 10.5594/J00985",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "issn": {
      "print": "0898-042X",
      "print$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "issn$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "journalAcronym": "MIJR",
    "journalAcronym$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_61_4/MIJR15Vol61No4.xml)",
      "source": "parsed",
      "updated": "2026-06-16T00:32:03.060Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "number": "4",
    "number$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "pages": "525–532",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publicationDate": "1953-10-01",
    "publicationDate$meta": {
      "confidence": "high",
      "note": "Day absent in NLM source — padded to 01",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_61_4/MIJR15Vol61No4.xml)",
        "source": "parsed",
        "updated": "2026-06-16T00:32:03.060Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "status": {
      "active": true,
      "active$meta": {
        "confidence": "medium",
        "note": "No explicit status in NLM source — journal articles default active",
        "source": "inferred",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "volume": "61",
    "volume$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00985.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    }
  }
}