{
  "$schema": "/api/schemas/documents.schema.json",
  "apiVersion": "1.0.0",
  "generatedAt": "2026-06-17T23:49:39.838Z",
  "sourcePath": "src/main/data/docs",
  "docId": "10.5594-J00889",
  "document": {
    "abbrevTitle": "J SMPTE",
    "abbrevTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "abstract": "A “soft-touch” surface is used on the film-bearing portion of processing rollers in order to accomplish motion-picture film processing with a minimum of process-attributable damage. The need for this development has come from the increased use of multirank 35mm and 16mm films such as 35/32, 35/S8 and 16/S8, the desire to process both 16mm and 35mm films in the same machine, and an increasing concern with soundtrack quality. Conventional processing spools cause edge abrasions or scratches. In the past this edge damage has not been a major problem, since it was outside the normal 35mm or 16mm picture area. The same degree of edge damage on many of the present multirank films would render a high percentage of the processed film unusable. A multifingered rubber-like soft tire is placed on a flat spool, creating a uniform film-support surface consisting of many soft, flexible fingers. This fingered surface also provides support over the entire width of the film, thereby distributing machine tension and minimizing in-process fluting. These tires may be used to process any 35mm or 16mm format film, perforated or unperforated, in the same machine without physical damage or costly changeovers. U.S. Patent No. 3,493,161, assigned to the Eastman Kodak Co., has been granted on the tire described in this paper.",
    "abstract$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "articleType": "research-article",
    "articleType$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "authors": [
      "Charles J. Crane",
      "Willis L. Stockdale",
      "Lawrence R. Witherow"
    ],
    "authors$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "copyright": {
      "holder": "Society of Motion Picture and Television Engineers, Inc.",
      "holder$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "year": "1970",
      "year$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "copyright$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docId": "10.5594-J00889",
    "docId$meta": {
      "confidence": "high",
      "note": "Derived from DOI 10.5594/J00889",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docLabel": "Journal of the SMPTE ( Volume: 79, Issue: 8, August 1970)",
    "docLabel$meta": {
      "confidence": "medium",
      "note": "Composed from journal title, volume, issue and date",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docTitle": "A Soft-Touch Surface Designed for Scratch-Free Motion-Picture Film Processing",
    "docTitle$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "docType": "Journal Article",
    "docType$meta": {
      "confidence": "high",
      "note": "NLM <article> — SMPTE journal paper",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "doi": "10.5594/J00889",
    "doi$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "href": "https://doi.org/10.5594/J00889",
    "href$meta": {
      "confidence": "high",
      "note": "Constructed from DOI 10.5594/J00889",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "issn": {
      "print": "0361-4573",
      "print$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "issn$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "journalAcronym": "MIJR",
    "journalAcronym$meta": {
      "confidence": "high",
      "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_79_8/MIJR15Vol79No8.xml)",
      "source": "parsed",
      "updated": "2026-06-16T00:32:03.060Z",
      "version": "smpte-journal-issue-xml@v1"
    },
    "number": "8",
    "number$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "pages": "712–719",
    "pages$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publicationDate": "1970-08-01",
    "publicationDate$meta": {
      "confidence": "high",
      "note": "Day absent in NLM source — padded to 01",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisher": "SMPTE",
    "publisher$meta": {
      "confidence": "high",
      "note": "Normalised to registry \"SMPTE\" convention from NLM publisher-name (The Society of Motion Picture and Television Engineers)",
      "source": "inferred",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "publisherLocation": {
      "city": "White Plains, NY",
      "city$meta": {
        "confidence": "high",
        "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
        "source": "parsed",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      },
      "country": "USA",
      "country$meta": {
        "confidence": "high",
        "note": "Parsed from journal_metadata XML (_source/SMPTE/APTARA/DL Project Files/08182015 BACKFILE JOURNAL FRESH/smptej_79_8/MIJR15Vol79No8.xml)",
        "source": "parsed",
        "updated": "2026-06-16T00:32:03.060Z",
        "version": "smpte-journal-issue-xml@v1"
      }
    },
    "publisherLocation$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    },
    "status": {
      "active": true,
      "active$meta": {
        "confidence": "medium",
        "note": "No explicit status in NLM source — journal articles default active",
        "source": "inferred",
        "updated": "2026-05-22T18:56:53.245Z",
        "version": "smpte-journal-article-nlm@v1"
      }
    },
    "volume": "79",
    "volume$meta": {
      "confidence": "high",
      "note": "Parsed from NLM article XML (_source/SMPTE/HIGHWIRE/Source Bak/smptej/10.5594_J00889.xml)",
      "source": "parsed",
      "updated": "2026-05-22T18:56:53.245Z",
      "version": "smpte-journal-article-nlm@v1"
    }
  }
}